News | July 29, 2008

8-channel UHF Multiplexer By FEIG ELECTRONIC

7193.JPG

With the new 8-channel UHF Multiplexer ID ISC.ANT.UMUX, several UHF antennas can be connected to one UHF Reader.

So the costs for reader hardware can be much reduced for Multi-Antenna-Applications. The 8-channel UHF Antenna Multiplexer ID ISC.ANT.UMUX is used for switching of RFID Antennas with operating frequencies from 860 – 960 MHz. With a ID ISC.ANT.UMUX, several antennas can be operated with only one reader.

It is possible to cascade several ID ISC.ANT.UMUX to improve the possible number of antenna connectors. That for, the Antenna Multiplexers can be addressed via DIP switch positions. The Multiplexer is controlled via antenna cable to the reader, so there is no additional connection necessary. This enables an easy installation even if several Multiplexers will be cascaded. At the same time, a targeted addressing of the antenna output is possible !

OBID - RFID by FEIG ELECTRONIC

About FEIG ELECTRONIC GmbH
FEIG ELECTRONIC is a German, worldwide leading manufacturer of RFID reader systems. OBID readers are in use worldwide – they are developed, manufactured and distributed by FEIG ELECTRONIC worldwide. OBID readers are developed according to public RFID standards, in very closed colaboration with every leading manufacturer of transponder chips. OBID readers are available for all common frequencies as LF, HF and UHF. For more information visit www.feig.de

SOURCE: FEIG ELECTRONIC