Diagraph PA/5000LT RFID

TampTenna is the result of the RFID antenna placed on the tamp pad of Diagraph's label printer/applicator. With Diagraph's TampTenna the maximum product throughput can be achieved, because the tag can be programmed while it is in transit to the product. Not only is this solution less expensive than an RFID print engine, it accomplishes the function of verifying the tag after it has been applied. This is done with the same antenna when the pad begins to retract. It's two systems in one, and much faster than a sequential encode and print system. System Can Print, Program, Apply and Verify up to 100 PPM.

The Diagraph PA/5000LT RFID solution eliminates the speed issue that most RFID solutions face. While on-unit reject solutions are tidy, are they practical? If throughput is limited to 20 PPM, can your lines handle the bottleneck? As tag quality improves, the next hurdle is speed, and Diagraph is ahead of the field when it comes to high-throughput, rugged machines.

Features And Benefits:

• Wal-Mart® ready 915 MHz EPC tag programming.
• TampTenna programs tag on tamp pad while stationary, or in transit, and verifies on product.
• Automatic serial number generation for each product without need for PC.
• One Serial Stream for format data. RFID information in label format is extracted for RFID programmer.
• Integrates with existing factory PLC's through standard discrete I/O for status and tag verification.
• Rugged design for harsh environments and 24/7 use.
• Easily Update firmware for performance or protocol.