-
12 Basic Steps For DoD Compliance
9/8/2010
This document will simplify the process required to comply with the DoD mandate and provide a common-sense approach to RFID compliance. It provides 12 basic steps to help you develop a robust and cost–effective solution with minimal headache and stress. By Avery Dennison Printer Systems Division
-
RFID Compliance For CPG Manufacturers
9/8/2010
This white paper the EPC Tag Data standard. If you have been asked recently to mark you cases and pallets with RFID
labels, you are probably sending those products to Wal-Mart!
Compliance is nothing new for you, many retailers have asked you to put a special label or identifier on your finished goods. RFID could be a bit more of a challenge because of the
technology but with the right supplier you can achieve compliance with minimal disruption to your operations. By Avery Dennison Printer Systems Division
-
Achieving Return On Investment Using RFID For Jewelry Tracking
9/7/2010
While some end uses search for a viable ROI in the use of RFID tracking, one application that has clear and immediate benefit is using RFID in jewelry tracking. Tracking jewelry inventory is uniquely suited to the use of RFID for several reasons. By Avery Dennison Printer Systems Division
-
Finding Value In Item Level RFID
9/7/2010
Retailers face a myriad of challenges. Three of the most important to bottom line results are: Out of Stocks/Excess Stock, Inventory Shrinkage and Customer
Perception/Customer Service. By Avery Dennison Printer Systems Division
-
The Next Revolution In Wireless And Mobility
8/30/2010
The history of communications has progressed from human/human through human/machine to machine/machine interchange. The long evolution of each of these modalities has undeniably had a profound impact on human civilization. The last frontier in this saga is to connect the physical world to the world of machines. By Ken Lynch, Director of Marketing, ThingMagic, Inc.
-
Bell Canada Optimizes Testing Workflows
8/19/2010
Montreal based Bell Canada is now 120 years old and turned in
revenues of $14.3B last year. By ClickSoftware
-
Street-Level Routing: Where The Rubber Meets The Road
8/19/2010
"Bypasses are devices that allow some people to dash from point A to point B very fast while other people dash from point B to point A very fast. People living at point C, being a point directly in between, are often given to wonder what's so great about point A that so many people from point B are so keen to get there, and what's so great about point B that so many
people from point A are so keen to get there. They often wish
that people would just once and for all work out where they wanted to be."
By ClickSoftware
-
Intelligent Foreign Object Prevention
8/18/2010
In the vast world of aviation, a clean and properly maintained aircraft is key to the very safety of those who operate,
work and ride on it. The same applies to the airport/airbase where aircraft fly in and out every day. Foreign objects
(FO) is any substance, debris or article alien to a vehicle or system, which would potentially cause damage. Millions
of dollars of damage each year are caused by FOD at airports and affect airports, airport tenants and the airlines. By XERAFY
-
Paper Roll Tagging: More Efficient Paper Industry of The Future
8/13/2010
Radio Frequency Identification (RFID) solutions are
rapidly replacing bar-code technology for identification
of different products and assets. In the paper industry,
RFID can yield benefits when paper rolls are
tagged and automatically identified from the manufacturing
phase to the entire supply chain life-cycle. By UPM
-
Las Vegas-Area Nursing Facility Adopts RFID For Memory-Impaired Residents
8/6/2010
When TLC Care Center, a habilitation, therapy and long-term nursing facility located approximately 20 miles southeast of Las Vegas, opened its new memory wing for residents with Alzheimer's disease or other forms of advanced dementia, it provided an RFID-enabled bracelet to each of the wing's residents, to ensure they don't wander away. By Claire Swedberg, RFID Journal
